The JX-813 has been designed for the end user who specializes in cutting materials with pure water.
This would typically include materials such as foam, rubber, insulation, plastic, acrylics, cloth, leather and so on. In some cases this will include fiber glass, carbon fiber and wood, but better results may be achieved using an abrasive system.
There are several principles that are important in pure water cutting that need to be addressed with waterjets:
- Materials are often light
- Cannot get wet
- Quantities of parts are often very high - thousands to millions
- Speed is critical
- Handling of the materials is often bulky and cumbersome
- Sizes of raw materials vary from product to product
- The materials can often be cut at very high speeds
So the JX-813 was built to accommodate all the above situations and criteria.
- Many safety features ensuring safe operation for your people and business.
- It's fast. Speeds of 76200 mm per minute or 1270mm per second are achievable.
- High acceleration / deceleration values are standard allowing small parts to be cut quickly
- Acceleration of 0.6 meters per second squared is standard.
- Material can be fed through the machine from all 4 sides - so from the 2.5m foot wide side or the 3.6m wide side.
- Material can be fed through the machine in either direction so you are not limited to one side.
- The controller can be positioned anywhere around the machine - several times a day. You are not limited to one location for the controller.
- Over-ride STOP and GO buttons can be operated from all 4 corners of the machine, allowing the entire system to be loaded, run, and unloaded by one operator.
- Self loading systems, either bun loaders or chain feed systems are available.
- Pinch rollers are available to feed the system - all synchronized to the speed of the chain.
- Laser sensors will allow automatic loading and unloading of the materials.
- Loading from large rolls of material or sheets.
- Remote access, bar code reading, marking, wireless pendent operation, multiple heads and multiple functionality are just some of the features and accessories.
- Water pressure from 60,000 psi to 90,000 psi, and pumps from 30hp, 50hp, 75hp, 100hp and 150hp.